Pw03 Power Supply for Access System Automatic Door Battery Backup

• Phase: Single Phase
• Type: Line Interactive
• Protection: Overvoltage
• Application: Industry
• Classification: Battery Backup
• Standby Time: Standard Machine
• Model NO.: PW03
• Standby UPS: Square Wave Output UPS
• Output Capacity: Small Type
• Equipment Mode: Centralized Model
• Brand: Turtech
• Power Input: AC100-240V
• Charging Voltage: DC27V
• Current: 0.5A
• Power Input for Battery: 24V 2300mA
• Transport Package: Carton Box
• Trademark: Turtech
• Origin: China
• HS Code: 8531100000
• Production Capacity: 10000/Month

Product Description

  Turtech intelligent technology(Zhejiang)Co.,Ltd(Doortec automatic door Co.,LTD).We are
specialize in automatic door research and developmentproduction and sales.The main products
include automatic sliding door automatic swing doorTelescopic sliding door Hermetic door,
Breakout svstem and related accessories.Since 2010Turtech has been focusing on the automatic
door industry for more than 13 vears. Except for the domesticmarketOur products are mainly sold
to Europe,America the Middle East, South America and southeast Asia.Turtech's products have
obtained CE,TUV EN16005UKCA,CBRohs certifications.Turtech will insist offer high quality and
good product to client from domestic and overseas.
 

1. Monitor supplies 26.5V to the battery.

2. When the battery is fully charged, the blue LED light goes off, Monitor stops charging the battery

3. When the battery voltage is less than 24V, the blue LED light is on, Monitor will start to charge the battery.

4. In the case of power failure, when the voltage of the backup battery continues to output to 21V, the green LED
will not light up. At this time, the Monitor will cut off the battery output voltage to avoid excessive consumption of
power and resulting in battery damage.When the battery is charged and the battery voltage is greater than 22V,
the green LED light will light up and the battery will resume its output voltage.

5. Error message: If the battery is not connected to Monitor, the green LED will flash three times continuously.
Prompt no battery access. (Or the battery is connected, but the it is damaged)

6. If the output voltage of Monitor is higher than 26.5V, the blue LED will flash continuously for 3 times, indicating
that Monitor is damaged and cannot work normally; If the red LED is not bright, check that the Monitor's input
voltage port is connected. If you confirm that the input voltage is correct, That mean Monitor is damaged, need replace it.

 

Product Description

DOORTEC PW03  Backup battery with Monitoring system

battery monitoring system: 

MODEL:	PW03
Power input	AC100-240V
Charging voltage:	DC27V,0.5A
Low power warning:	stop the battery output when it is lower than 21v

battery part: 
 

battery type:	lead-acid batteries
Capacity:	24v  2300mAH
bracket(optional):	Asian,EU style.

 

Detailed Photos